TCPD43CS - Standard Open, Low Profile Domed Head Standard Ope
Check Availability
This product is not available to buy online, please contact us for more information.
Technical Specification
| Code/Part No./Desc | TCPD43CS* |
|---|---|
| Rivet Type | Standard Open General purpose open rivet available in wide range of materials and head styles. Suitable for applications with low load bearing requirements. |
| Rivet Head | Low Profile Domed Head Standard low profile head, suitable for most applications. |
| Rivet Body Material | Copper |
| Rivet Mandrel Material | Bronze |
| Weight | 1.25 kg |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|---|---|---|---|---|---|---|---|---|
| 3.2 mm | 5 mm | 0.5 mm - 2.1 mm |
3.3 mm | 6.5 mm | 1 mm | 1.83 mm | 800 N | 1200 N |
*Rivet may be subject to minimum quantities.
Key
|
|
Nominal Diameter (Min-Max Diameter) The nominal diameter of the rivet body and the minimum and maximum diameter dimensions are stated. |
|---|---|
|
|
Body Length (+/- 0.5mm) The nominal rivet body length is stated. A tolerance of +/- 0.5mm should be allowed for. |
|
|
Grip Range (Min-Max) This is the recommended thickness range over which the body length will consistently provide a good setting in a hole of the specified diameter. |
|
|
Hole Size This is the recommended diameter range of the drilled/punched hole which should be burr free. |
|
|
Flange Diameter (Min-Max) The rivet flange diameter is stated at minimum and maximum dimensions. |
|
|
Flange Thickness (Max) The maximum flange thickness is stated. |
|
|
Nominal Mandrel Diameter The nominal (or maximum value for grooved mandrels) is shown to assist in the selection of the correct rivet tool nosepiece. |
|
|
Shear Performance The shear figures quoted are indicative of the performance of the rivet. Actual performance will depend on workpiece material types and thickness. |
|
|
Tensile Performance The tensile figures quoted are indicative of the performance of the rivet. Actual performance will depend on workpiece material types and thickness. |
